Detection For Sale Wholesale

Features of Our Detectors

Multi-Sensor Detection Technology
Intelligent Alarm Processing
Real-Time Monitoring and Notifications
Wide Range of Detection Options
Low Maintenance and Self-Diagnostics

TX3202-W Wireless Input Interface

This product is used to monitor the working status of active fire-fighting equipment (such as water flow indicators, pressure switches, etc.), and transmit the action signals of these devices to the controller wirelessly.



TW3221Wireless Input-Output Module

This device uses wireless communication technology, eliminating the need for wiring. It has a built-in unique ID and can be networked with wireless transmission modules and fire alarm controllers. It ...



TX3133A Point-type Household Thermal Fire Detector

This device features a two-way, dual-wavelength scattering technique with a low false alarm rate. It has a fully integrated chip design for strong anti-interference ability, an integrated injection-mo...



TX7110 Intelligent Dual Heat Detector

The TX7110 intelligent dual heat detector is compatible to the TX7004 Analogue Intelligent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid addressable communication compatib...



TXC7111 Conventional Heat Detector

TXC7111 Conventional Heat Detector (A1R) adopts advanced MCU technology. It can accurately detect the ambient temperature variation to confirm and send a fire alarmtimely. It is designed with an esthe...



TXC7101 Conventional Smoke Detector

TXC7101 Conventional Smoke Detector uses advanced micro-programmed controller unit (MCU) technology to realize auto compensation for external environment data drift and fire confirmation. It is suitab...



TX3190AE Wireless/Standalone Smoke Detector

TX3190AE wireless smoke detector consists of a smoke detector and an IoT communication unit (LoRa), which can detect a large amount of smoke generated during a fire and send out an alarm signal in tim...



TX7100 Intelligent Addressable Optical Smoke Detector

The TX7100 intelligent addressable optical smoke detector is the ideal device for most applications, due to its spiffing linear response to a wide variety of different types of smoke patterns. Secure ...



TX3180E Wireless/Standalone Heat Detector

TANDA LORA Wireless fire alarm system, with early detection of alarm conditions, automatic notification to fire alarm sites and evacuation of surrounding personnel, best for small places such as resid...



TX7130 Conventional Reflective Beam Detector

TX7130 Conventional Reflective Beam Detector has built in Laser beam pointing and Digital guide display for real user friendly alignment method. The Laser beam pointing accurately point the exact loca...



681-001 Remote Indicator

681 remote indicators provide fire detection and alarm system designers with an economical product for life safety and property protection applications.



DET-C632 Conventional Heat Detector

Designed to comply with EN54-5, European Standard. LPCB Certification approved. With a combination of detecting Rate-of-Rise and Fixed Temperature for higher safety, this detector is ideal for general...



DET-C631 Conventional Optical Smoke Detector

Designed to comply with EN54-7, European Standard. With LPCB Certification. The DET-C631 optical smoke detector is suitable for general smoke detection, particularly effective in detecting large visib...



TX3100D Point-type Photoelectric Smoke Fire Detector

It has a fully integrated chip design with strong anti-interference and insect-proof abilities. It includes automatic compensation, self-diagnosis, and prevention of water vapor false alarms. The inte...



YJLH101 Explosion-proof Infrared Flame Detector(Single Wave)

This device features accurate alarm without false alarms, as it uses intelligent algorithms to effectively identify fire sources and avoid interference. It supports two power - supply operating modes:...



TX3H02 Point-type Infrared Flame Detector

Two-wire system, electronic encoding.Having fire alarm and fault outputs



TX3110B Point-type Temperature-sensitive Fire Detector

Two-wire system, electronic encoding.Adopt highly integrated chips, with stable performance.The product category is adjustable and can be set on-site.Use highly sensitive thermal elements, with fast r...



TX3120A Point-type Combined Smoke and Temperature-sensitive Fire Detector

Bidirectional scattering technology, with a low false alarm rate.Intelligent software algorithm for judgment, effectively suppressing interference in humid and hot environments.Fully integrated chip d...



TX3101A Point-type Photoelectric Smoke Fire Detector

Non-coding.Bidirectional scattering technology, with a low false alarm rate.Fully integrated chip design, with stable performance.PCB board full-sealed protection process.Automatic compensation functi...



TX3111A Point-type Temperature-sensitive Fire Detector

Adopt software and hardware filtering, with strong anti-interference ability.Fully integrated chip design, with stable performance.PCB board full-sealed protection process.Adopt highly sensitive therm...



TX7214 Addressable Broadcast Control Module

The unit manufactured base on the requirement of EN 54 part 18, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs and its plug-...



YJLH101Ex Explosion-proof Red and Ultraviolet Combined Detector(Single Red and Single Violet)



YJLH102EX Explosion-proof Point-type Ultraviolet Flame Detector



TX3104 Point-type Photoelectric Smoke Fire Detector

Two-wire system, electronic encoding.Highly integrated processing chip.Low monitoring current and alarm current.Automatic drift compensation for sensor sensitivity.



TX3112 Point-type Temperature-sensitive Fire Detector

Two-wire system, electronic encoding.Highly integrated processing chip.Low monitoring current and alarm current.Automatic drift compensation for sensor sensitivity.



TX3400 Isolating Safety Barrier

This device supports two - wire bus input, which is simple and convenient for wiring. It also supports four - wire system input with stronger load - bearing capacity. The non - intrinsically safe side...



TX3202E Wireless Input Interface

TX3202E (LoRa) wireless input interface, is used to monitor the working state of active fire fighting equipment (such as water flow indicator and press switch, etc.) and transmit motion signals of the...



TX3105 Explosion-proof Smoke Detector

Two-wire system, electronic encoding.Flameproof and intrinsically safe type, no need for an additional safety barrier, and the intrinsically safe detector can be replaced.Low monitoring current and al...



TX3113 (A2R) Explosion-proof Temperature-sensitive Detector

Two-wire system, electronic encoding.Adopt a highly integrated processing chip.Built-in high-voltage communication function.Use a highly sensitive thermal element to improve response speed.



TR3105 Combustible Gas Detector

Two-wire system, electronic encoding.Use a high-sensitivity, long-life sensor.Have an active pulse output and can directly shut off gas valves.Use a ceiling-mounted installation method, which is simpl...



TR3107 Household Combustible Gas Detector

Four-wire system, electronic encoding.Use a sensor with good linearity, high sensitivity, and long service life.Automatic sensor life detection.Operate stably and reliably, and be less affected by amb...



TR3108 Household Combustible Gas Detector

Two-wire system, electronic encoding.Adopt a high-sensitivity, long-life sensor.Automatic sensor life detection.High-temperature and low-temperature compensation algorithms to reduce false alarms.Use ...



TR3106A Household Combustible Gas Detector

Have sound and light alarm functions.Have two output modes: active and passive.Automatic sensor life detection.After an alarm, when the gas concentration is lower than the alarm set value, the detecto...



TR3123A Point-type Combustible Gas Detector for Industrial and Commercial Use

Four-wire system, electronic encoding.Flameproof structure, high explosion-proof grade.The sensor can be replaced.Compound gas detection.Two levels of sensitivity can be set.Multiple outputs.Sensor fa...



TR3125 Point-type Combustible Gas Detector for Industrial and Commercial

Flameproof structure, high explosion-proof grade.Sensor replaceable.Compound gas detection.Two levels of sensitivity can be set.Multiple outputs.Sensor fault and lifespan detection.



TX3110A Point-type Thermal Fire Detector

Use in Zone 1 and Zone 2 with explosion-proof requirements in industries such as petroleum and chemical. It should be used in combination with the TX3400 isolated safety barrier in explosion-proof are...



TX3101A Point-type Photoelectric Smoke Fire Detector

This product adopts two - way scattering technology to achieve a low false - alarm rate, ensures stable performance through fully integrated chip design, has a low monitoring current, features a non -...



TX3190A Independent Photoelectric Smoke Fire Detection Alarm

360-degree omnidirectional detection:This device is capable of detecting smoke from all directions without any blind spots. It can monitor smoke from every aspect and has a fast response speed, ensuri...



TX3131A Point-type Household Smoke Fire Detector

This point-type household smoke fire detector, JTY-GM-TX3131A, utilizes a highly integrated chip for stable performance. It features adjustable product categories that can be set on-site. High-sensiti...



TX3201 Input Module

Two-wire system with electronic encoding, built-in dedicated IC for strong anti-interference, isolation design to reduce external interference, plug-in structure for convenient and reliable installati...



TR3210 Carbon Monoxide Detector

This carbon monoxide detector features a high-sensitivity and long-life sensor. It includes an automatic sensor life detection function. Additionally, it utilizes high-temperature and low-temperature ...



TX3218 Input/Output Module

Two-wire system with electronic encoding, built-in microprocessor and input/output disconnection detection, isolation design for external interference reduction, input configurable in NO/NC line detec...



TX3180 Independent Thermal Fire Detection Alarm

This independent thermal fire detection alarm is powered by an external battery, has low power consumption, self-check and battery under-voltage reminder functions, dual temperature detection, and use...



TX3214D Output Module

Two-wire system with electronic encoding, built-in dedicated IC. Detects broadcast speaker line faults (factory default: no line check). Plug-in structure for easy construction and installation, and w...



TF3105 Fire Emergency Evacuation Pressure Difference Detector

The TF3105 detector uses a dedicated chip, has strong anti-interference through multi-level filtering, and a convenient, reliable plug-in design.



TX3219A Isolator

The isolator is equipped with advanced short - circuit and over - current detection and protection capabilities. It incorporates a built - in dedicated integrated chip that allows for the flexible sel...



TX3961 Detector Waterproof Box

The product has dust-proof and waterproof functions, and can meet the application requirements in dusty, humid and other environments.



TX3207 AInput/Output Module

This device features a two-wire system with electronic encoding, utilizes dedicated integrated chips, employs isolation design to minimize external interference, implements multi-level software and ha...



TX3222 Relay Module

Four-wire system, electronic encoding, plug-in installation, connected to current output non-coded detectors, with line detection function. Note: The total number of non-coded devices connected to a s...



TX3211 Input-Output Module



TX3206 Input-Output Module



Conventional Fire Alarm System Diagram

A Conventional Fire Alarm System is a traditional fire detection system that uses multiple zones, each with its own set of detectors and manual call points. When a detector or call point is activated, the control panel identifies the specific zone where the alarm originated, allowing for a quick response. These systems are cost-effective and suitable for smaller buildings or areas with straightforward layouts. They provide reliable fire detection and are easy to install and maintain, making them a popular choice for many applications.

Conventional Fire Alarm System Design

Conventional fire alarm systems use a network of devices to detect and alert occupants of fire hazards in specific zones.

Zoning

The system divides the building into zones, each monitored by detectors. When an alarm is triggered, the control panel identifies the affected zone.

Detection Devices

These systems use smoke detectors, heat detectors, and manual call points to identify fire conditions, ensuring timely alerts and responses.

Intelligent Fire Detection and Alarm System

Control Panel

The central hub processes signals from detection devices, activates alarms, and provides information to emergency responders, enhancing safety and coordination.

Become a Member of Our Sales Partner Network – Get in Touch with Us Today!

TANDA Development Pte. Ltd.

E-mail

Info@tandasystem.com
Phone Number

+65 69141680
Address

217 Kallang Bahru, Singapore

Request a Free Quote