TG7300 Series Power Amplifier is an important part of emergency broadcast system, including TG7300(150W), TG7301(300W) andTG7302(500W). TG7300 Series Power Amplifier is a new-generation product designed by TANDA complying with national standard GB16806-2006 Automatic Control System for Fire Protection . It can carry out emergency broadcast together with TG7100 Broadcast Control panel and loudspeakers.
• Self-check is available
• Auto/Manual mode
• The monitor can be muted automatically to eliminate audio return while the microphone is used to broadcast
• As it receives the emergency signal, the power amplifier can automatically adjust audio to preset position not controlled by the volume potentiometer, eliminating the influence of human operation
• Automatically switching between the main power and the standby power
• Fault uploading
• Over heat protection
• Providing 24VDC off-set for local audio output line and line-checking module
• Communicate with TG7100 Broadcast Control Panel through RS485
The Main Power | 220VAC(187V~242V)50HZ |
Standby Power | 220VAC(187V~242V)50Hz |
Local Address | 1~10(binary code, no repeated codes) |
Input Resistance | 10KΩ |
Input Level | 775mV |
Stable Voltage Output | 120V |
Frequency Response | 80Hz~8KHz(90V~145V) |
Harmonic Distortion | ≤5% |
Noise Level | <37mV |
Dimension Lx W x H | 483.0mm×330.0mm×88.5mm |
Weight | 6.5 Kg |
Operating Temperature | -10°C to +40°C |
Relative Humidity | ≤95% Relative Humidity, Non condensing |