Four-wire system with electronic coding and high-brightness LED light source.
Enables separation of sound and light alarms, featuring alternating broadcast of alarm sounds and voice messages.
Plug-in installation design, requiring compatibility with TX3308-DZ base for use.
Adopts a dedicated integrated chip.
Utilizes multiple high-brightness LEDs as light sources, featuring eye-catching display, long lifespan, and low power consumption.
Electronic coding mode for simple engineering debugging.
Reliable operation with bus and DC 24V power supply.
Hardware and software filtering design to enhance anti-interference capability.
Alternately broadcasts alarm sounds and voice messages.
Working Voltage:
- Bus voltage: Pulsed 24V (15V–28V)
- Power supply voltage: DC24V (20V–28V)
Operating Current:
- Bus monitoring current: ≤0.5mA
- Bus activation current: ≤0.5mA
- Power monitoring current: ≤4.0mA
- Power activation current: ≤40.0mA
Sound Pressure Level:
The sound gradually increases after activation and stabilizes within 3–5 seconds, reaching 70dB–105dB (A-weighted) at 3 meters directly in front.
Tone Modulation Cycle: 2.5S–4.5S
Voice Cycle:Approximately 20S
Flashing Frequency:1.0Hz–1.8Hz
Coding Method:Electronic coding (occupies one bus address point, configurable between 1–242)
Wiring System:Non-polar two-wire system for both bus and power lines
Operating Environment
- Temperature: 0℃–55℃
- Relative humidity: ≤95%RH (non-condensing)
Dimensions:121mm×86mm×45mm (including base)
Housing Color:Red
Weight:Approximately 105g (including base)